Overview
Brand
THAYER SCALE
Model
PF-SC-S-4.5
Type
None
Stock #
Condition
New
Year
2020
Location
Hiram, Ohio
United States
Specifications
Manufacturer
Thayer Scale | Hyer Industries
Model
PF-SC-S-4.5
Serial No.
1500-0993
Load Cell Model
LC-174
Load Cell Serial No.
174-1835
Capacity
1195lbs/hr
Approx Feed Rate Range
0.14 - 600 (ft³ hr)
Nominal Capacity
75lbs
Scale Capacity
30-500lbs
Scale Suspension
Cable System
Load Cell
Strain Gauge
Controls
Thayer Controls S52
Electrical Specs
3-Phase, 230/460V, 60Hz | XP-Motor on both screw feeder and agitator
Manufacture Date
N/A
Machine Dimensions
52”W x 56”L x 56”H
Overall Skid Dimensions
56”W x 65”L x 63”H
Weight
880lbs (approx.)
Typical Materials Handled
CLAY, POLYETHYLENE PELLETS, LIMESTONE, PIGMENTS, IRON OXIDE, ZINC BORATE, ZINC OXIDE, OSB RESIN, QUICK LIME, STARCH, FLUORSPAR, ZEOLITE
Seller Note:
Unit is NEW | NEVER USED | NEVER PUT INTO PRODUCTION. The shipping struts from the factory can still be seen in the pictures. The scale was never set-up. This unit shows no signs of wear or any residue on the inside of the hopper. As seen in the pictures it is exceptionally clean with no use at all. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. We have tested both the scree feeder and the agitator and both function as intended with no issues noted. Pictures are of the actual unit being purchased in the original location they were in production. Unit is currently at our facility and ready to be inspected if chosen by the buyer. This unit is ready for immediate shipment. Buyer is always welcome to inspect the unit before purchasing at our location.
Spec Sheet
|
Thayer Scale PF-SC-S-4.5 Loss-In-Weight Screw Feeder |
||||||
|
Manufacturer: |
Thayer Scale | Hyer Industries |
|||||
|
Model: |
PF-SC-S-4.5 |
|||||
|
Serial No.: |
1500-0993 |
|||||
|
Load Cell Model: |
LC-174 |
|||||
|
Load Cell Serial No.: |
174-1835 |
|||||
|
Capacity: |
1195lbs/hr |
|||||
|
Approx Feed Rate Range: |
0.14 - 600 (ft³ hr) |
|||||
|
Nominal Capacity: |
75lbs |
|||||
|
Scale Capacity: |
30-500lbs |
|||||
|
Scale Suspension: |
Cable System |
|||||
|
Load Cell: |
Strain Gauge |
|||||
|
Controls: |
Thayer Controls S52 |
|||||
|
Electrical Specs: |
3-Phase, 230/460V, 60Hz | XP-Motor on both screw feeder and agitator |
|||||
|
Manufacture Date: |
N/A |
|||||
|
Machine Dimensions: |
52”W x 56”L x 56”H |
|||||
|
Skid Dimensions: |
56”W x 65”L x 63”H |
|||||
|
Weight: |
880lbs (approx.) |
|||||
|
|
|
|||||
|
Typical Materials Handled: |
CLAY, POLYETHYLENE PELLETS, LIMESTONE, PIGMENTS, IRON OXIDE, ZINC BORATE, ZINC OXIDE, OSB RESIN, QUICK LIME, STARCH, FLUORSPAR, ZEOLITE |
|||||
|
|
|
|||||
|
Seller Note: |
Unit is NEW | NEVER USED | NEVER PUT INTO PRODUCTION. The shipping struts from the factory can still be seen in the pictures. The scale was never set-up. This unit shows no signs of wear or any residue on the inside of the hopper. As seen in the pictures it is exceptionally clean with no use at all. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. We have tested both the scree feeder and the agitator and both function as intended with no issues noted. Pictures are of the actual unit being purchased in the original location they were in production. Unit is currently at our facility and ready to be inspected if chosen by the buyer. This unit is ready for immediate shipment. Buyer is always welcome to inspect the unit before purchasing at our location.
|
|||||
|
|
||||||
|
|
||||||
Related Listings
Ulma Atlanta E Flow Wrapper (HFFS)
Westfalia 410D | 96” Bag Flattener