Type
Baggers
Manufacturer
AUTOMATED PACKAGING SYSTEMS
Model
30" SPrint SidePouch Bagger/Sealer
Year
2020
Stock #
01A-1121
Condition
Like New
Manufacturer | Automated Packaging Systems, LLC |
Model | 30” SPrint Side Pouch Bagger / Sealer |
SPrint Serial No.: | AP00093033 Rev. B1 |
Part No.: | 470000A13 |
Bag Size: | W: 2.63 to 20 inches L: 3 to 18.75 inches |
Bag Thickness: | 1.5 to 4.0mil |
Pass Thru: | Up to 5” |
Operating Rate: | 70 bags/minute in intermittent mode /// Up to 120 bags/minute in continuous mode |
Air Specs | 60psi of clean, dry air | 4.14Bar |
Frame Material: | Stainless Steel |
Electrical Specs: | 120Volts, 20amps, Single Phase, 60HZ, 1200Watts |
Manufacture Date | 5/1/2019 |
Overall Dimensions | 30V - 138”L x 32”W x 36”H (Pallet Dimensions will be larger) |
Dimensions | 138”L x 32”W x 36”H |
Weight | 380 pounds |
Autobag SPrint 30” SidePouch Bagger |
||||||
Manufacturer: |
Automated Packaging Systems, LLC |
|||||
SPrint Model: |
30” SPrint Side Pouch Bagger / Sealer |
|||||
SPrint Serial No.: |
AP00093033 Rev. B1 |
|||||
Part No.: |
470000A13 |
|||||
Bag Sizes: |
W: 2.63 to 20 inches L: 3 to 18.75 inches |
|||||
Bag Thickness: |
1.5 to 4.0mil |
|||||
Pass Thru: |
Up to 5” |
|||||
Operational Speed: |
70 bags/minute in intermittent mode /// Up to 120 bags/minute in continuous mode |
|||||
Air Supply: |
60psi of clean, dry air | 4.14Bar |
|||||
Frame Material: |
Stainless Steel |
|||||
Electrical Specs: |
120Volts, 20amps, Single Phase, 60HZ, 1200Watts |
|||||
Manufactured Date: |
5/1/2019 |
|||||
Overall Dimensions: |
30V - 138”L x 32”W x 36”H (Pallet Dimensions will be larger) |
|||||
Weight: |
Approx. 380lbs |
|||||
|
|
|||||
Seller Note: |
The unit being sold is USED **BUT IN LIKE NEW / EXCELLENT CONDITION** and shows no signs of wear or tear. This unit has very low cycle counts along with powered on hours. This unit has been gone through and tested with no issues noted. This unit needs nothing and can go straight into production. The unit has been removed from a working environment and was functioning as intended when it was taken out of service. There are NO EXTRAS INCLUDED, besides what you see with the unit pictured. This unit has been tested as seen in the video. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures and video are of the actual unit being purchased. Full crating of the unit will be an extra cost, otherwise unit will only ship on pallet. If the buyer has any questions, please feel free to ask. As always, buyer is welcome to personally inspect and test unit at our facilities. |
|||||
|
||||||
|
||||||
|
|
|||||
SPrint Benefits: |
|